Back to Blog
    Business Growth

    Electrician Flat Rate Pricing: How to Price Electrical Work From Cost

    Electrician flat rate pricing from BLS wages and IRS overhead: a panel swap, EV circuit and GFCI priced from cost, plus trip fees and price book software costs.

    Nov 20, 2026Updated Nov 20, 202617 min read

    TL;DR

    • Flat price = (task hours × cost of a billable hour + parts) ÷ (1 − overhead − profit).
    • A median electrician at an electrical contractor costs about $66 per billable hour, which sells for about $114.
    • At 27% overhead and 15% profit: 200-amp panel swap $2,517, EV charger circuit $972, GFCI swap $145.
    • The GFCI price lands $54 under the low end of Housecall Pro's contractor range, so small tasks need a trip charge.
    • Electrical contractor corporations' tax returns show 27.5% overhead and a 6.6% net, so a 15% profit is a goal, not an average.
    • Price book software prints $39 to $99 per tech a month, and one free plan covers 500 tasks.

    Electrician flat rate pricing sets one price per task: hours times the cost of a billable hour, plus parts, divided by one minus overhead and profit. At a $66 billable hour, 27% overhead and a 15% profit, a panel swap prices at $2,517.

    This guide on how to price electrical work is for owners of one-truck to ten-truck residential and light commercial shops, and for whoever runs their office. Every figure was read at its source on November 20, 2026, and the four tools below take your own numbers.

    Electrician flat rate pricing in one formula and five inputs

    Flat rate, or task-based, pricing fixes the price of a defined task before the work starts, however long it runs. Time and materials (T&M) bills the hours worked plus parts at a markup. Both rest on the same costs. Flat rate does the arithmetic once in the office, so the tech quotes from a book instead of a stopwatch.

    1. Task hours. Labor hours on the task itself, from your own invoices.
    2. Cost of a billable hour. Wage plus benefits and taxes, spread over the hours a customer pays for.
    3. Parts. What the supply house charges you.
    4. Overhead. Every cost not tied to one job, as a share of revenue.
    5. Net profit. What you keep, also as a share of revenue.

    Overhead and profit are shares of the price, so the formula divides by what is left after them. Set your own numbers in the calculator below. The job buttons load task times and part costs published by Jobber, Mr. Electric, Fixr, Qmerit and a supply house.

    Build a flat rate electrical price

    JobDirect costPrice to quoteNet profitQuote if you add 42% as markup
    200-amp panel swap: 14 hours, $536 load center$1,460$2,517$378$2,073, nets $53
    EV charger circuit: 4 hours, $300 materials$564$972$146$801, nets $21
    GFCI swap: 1 hour, $18 receptacle$84$145$22$119, nets $3

    Defaults: $66 per billable hour of labor, 27% overhead, 15% net profit. Wages and employer costs from the Bureau of Labor Statistics, billable share from Field Promax in ACHR News, overhead from IRS Statistics of Income, profit from Jobber, task times from Jobber, Fixr and Mr. Electric, parts from Standard Electric Supply and Qmerit. All read November 20, 2026. With scripts on, this is a calculator: change the hours, labor cost, parts, overhead and profit.

    The divisor is what is left of each dollar after 27% overhead and a 15% profit: 0.58. Here is the default state of the calculator, one job per column.

    Line200-amp panel swapEV charger circuitGFCI swap
    Labor hours1441
    Hours times $66$924$264$66
    Parts at cost$536$300$18
    Direct cost$1,460$564$84
    Divided by 0.58$2,517$972$145
    Net profit at 15%$378$146$22

    The panel price covers the load center only. Breakers, the meter base and the permit are extra lines, and a later section sets each price beside what contractors charged.

    Flat rate against time and materials: who carries the overrun

    The trade-off is about who pays for the surprise. ServiceTitan's 2023 guide on pricing electrical work favors flat rate but lists two drawbacks: jobs that run past the book time, and customers who push back on the price.

    QuestionFlat rateTime and materials
    When the customer knows the priceBefore work startsWhen the bill arrives
    Who carries an overrunThe shopThe customer
    A faster techKeeps the full priceEarns a smaller invoice
    A quick device swapCan look steepLooks cheap, may lose money
    Troubleshooting an unknown faultRisky to quoteFits the job
    VerdictFlat rate for repeatable tasks, T&M for the unknowns

    Housecall Pro's October 2026 pricing guide calls a hybrid usually best: flat rate for predictable jobs and hourly pricing for diagnostics. A device swap repeats all year, while a breaker that trips at random needs time before anyone can name a price.

    In practice that means a diagnostic fee to find the fault, then a book price for the repair. The customer sees a price before the repair starts, and the hunt is paid for either way.

    How to price electrical work from a $29.60 wage

    Start with what the electrician earns. The Bureau of Labor Statistics (BLS) publishes electrician pay from its May 2025 survey, and the figure that fits a contracting shop is the median at electrical contractors.

    • Median, all electricians: $30.38 an hour, or $63,190 a year.
    • Median at electrical contractors and other wiring installation contractors: $61,570 a year, or $29.60 an hour over 2,080 hours.
    • Lowest tenth: under $42,640 a year. Highest tenth: over $108,510.
    • Jobs: about 821,000 in 2025, with 9% growth projected to 2035.

    BLS also measures labor burden, what an employer pays on top of the wage. For the BLS group that covers construction and extraction occupations, wages in June 2026 were $32.17 an hour and benefits $14.47, so each wage dollar carried 45 cents more.

    That 45 cents covers paid leave, insurance, retirement, overtime and bonus pay, and required taxes. The IRS sets part of the required slice: the employer pays 6.2% for Social Security and 1.45% for Medicare.

    So a $29.60 wage loads to $42.92 an hour before a single hour is billed.

    No one publishes a measured billable share for electricians

    A loaded hour is not yet a billable hour, one a customer pays for. Drive time, shop time and callbacks all sit between them. The only measured figure we found is for HVAC: Field Promax tracked 300 HVAC companies and found techs bill 5.7 of 8.8 paid hours, about 65%, as ACHR News reported in June.

    Housecall Pro's electrical labor rate calculator uses a far lower number. It calls 30% average efficiency and 50% highly efficient, and it names no source for either. The table shows how far that spread moves the rate, with burden, overhead and profit at the calculator defaults.

    Billable shareCost of a billable hourRate to charge
    30%, Housecall Pro "average"$143.07$247
    50%, Housecall Pro "highly efficient"$85.84$148
    65%, Field Promax measured (HVAC)$66.03$114
    From 30% to 65%The rate you need falls by $133 an hour

    We use 65% because it is the only measured share, and we say it comes from HVAC. Housecall Pro's own pricing guide says electricians typically charge $50 to $130 an hour, and a $247 rate sits nearly double the top of that range. Pull four weeks of timesheets and divide invoiced hours by paid hours.

    Put your own wage and share into the calculator below.

    What to charge for an hour of electrical labor

    WageBLS hourly wageLoaded cost an hourCost of a billable hourRate to charge
    Electrical contractors$29.60$42.92$66.03$114
    Electrician, median$30.38$44.05$67.77$117
    Bottom tenth$20.50$29.72$45.73$79
    Top tenth$52.17$75.65$116.38$201

    Defaults: 45% burden, 65% of paid hours billed, 27% overhead, 15% net profit. Wages and employer costs from the Bureau of Labor Statistics, billable share from Field Promax in ACHR News, overhead from IRS Statistics of Income, profit from Jobber. All read November 20, 2026. With scripts on, this is a calculator: pick a wage, then change the burden, billable share, overhead and profit.

    At the defaults, the median electrical contractor's hour costs $66.03 once billed and sells for $114. That is inside Housecall Pro's $50 to $130 range.

    Our labor rate calculator builds burden from tax and insurance figures instead of the BLS ratio, and lands on 30% for an electrician.

    Overhead: electrical contractors' tax returns say 27.5%

    Overhead is every cost not tied to one job: the office, trucks, insurance, software, marketing and your own salary. Total twelve months of it from your profit and loss statement (P&L) and divide by revenue for the same months.

    If your books are not split that way yet, the IRS has the closest thing to a national figure. Its Statistics of Income Table 5.1 for tax year 2023 carries a separate column for electrical contractors, built from 71,248 corporate returns.

    Line, share of business receiptsElectrical contractorsPlumbing and HVAC contractors
    Cost of goods sold65.9%63.7%
    Gross margin34.1%36.3%
    Overhead, officer pay included27.5%29.4%
    Net income6.6%6.9%
    Advertising0.36%0.80%
    Our default27% overhead, 15% net profit as a goal

    These shares are our arithmetic on the table. Cost of goods sold took 65.9% of $226.1 billion in business receipts, net income was 6.6%, and everything between, officer pay included, came to 27.5%. The code counts every corporation in the trade, new construction and commercial work included.

    27.5%

    of business receipts went to overhead at electrical contractor corporations, from IRS Statistics of Income for tax year 2023. Net income was 6.6%.

    Vendor targets sit well above the tax returns. ServiceTitan's guide quotes a Mister Sparky franchise in Michigan aiming for a 60% gross margin across all jobs, against the 34.1% average.

    Jobber's guide, updated in April, calls a 12% to 18% profit margin healthy and suggests 15% as a starting point.

    The calculators default to 27% overhead and that 15% net. Fifteen is a goal, more than twice the 6.6% the average corporation kept. Set it lower in the calculator if your market will not carry it.

    Run the markup check before you trust a percentage. Add 42% to the panel's cost as a markup and the quote is $2,073. After overhead, that leaves $53 of profit instead of $378. Our markup vs margin guide has the conversion table.

    Priced right, but the board has holes?

    A price book only pays on the jobs you win. Skill Mammoth builds websites and runs marketing for contractors and home service businesses.

    Get a website audit

    Task times: the sources disagree by a factor of two

    Task time is the one input a price book vendor cannot know for your shop. Here is what the sources we read print for the three jobs.

    JobPublished timePublisher
    200-amp panel swap4 to 8 hours, two electriciansFixr, January 2025
    Panel upgrade14 hours, worked exampleJobber, April 2026
    Level 2 charger install4 to 8 hoursMr. Electric blog, November 2026
    Upgrade an outlet to GFCIAbout 1 hour per unitFixr, August 2025
    Replace one outletHalf an hour to an hourFixr, August 2025

    Fixr's panel figure works out to 8 to 16 labor hours once both electricians are counted. Jobber splits its 14 hours across prep and demolition, rough-in and mounting, then trim and testing. We use 14 because it is a printed number inside Fixr's range.

    The spread costs real money. At the defaults the panel prices at $1,834 at the low end and $2,745 at the high end. An EV circuit at Mr. Electric's longest time prices at $1,428, above the top of what Housecall Pro's contractors charged.

    1. Export a year of invoices. Pull the task, the clocked time and the tech on each.
    2. Take the median. One six-hour callback should not set the price of every GFCI.
    3. Price for your average tech. Your fastest tech then earns more per task, which is the reward flat rate is built to pay.
    4. Add modifiers for hard access. Attic runs, finished basements and long trenches get their own line instead of a padded base time.
    5. Recheck each quarter. Compare book time with clocked time on the tasks you sell most.

    Drive time does not belong in the task time. The billable share already spreads it across every billed hour, so adding it to each task charges twice. Small tasks are the exception, covered under trip fees below.

    Parts: price from the supply house, not the cost guide

    The divisor marks every part up by the same 72%, a multiplier of 1.72. Here is what we read today for the parts in the three jobs.

    PartPrinted priceWhere
    Square D Homeline 200-amp main breaker load center$536.27Standard Electric Supply
    200-amp panel, materials only$300 to $400Fixr cost guide
    200-amp panel alone$250 to $350This Old House cost guide
    Square D Homeline 50-amp two-pole breaker$40.95Standard Electric Supply
    Conduit, wire and breaker for a Level 2 charger$300, exampleQmerit, October 2026
    15-amp slim GFCI receptacle$18.29 each, in a 10-packStandard Electric Supply

    The supply house printed $536.27 for a load center the two cost guides put at $250 to $400. That gap is why the price book should use the number on your last invoice, not a cost guide.

    The EV preset uses Qmerit's $300 example because no single page we read priced the wire run. The 50-amp breaker alone is $40.95 at the supply house, and Qmerit names panel capacity and the distance to the charger as the two main cost drivers.

    Housecall Pro's own panel walkthrough budgets $1,200 of materials for a storm-damaged 200-amp upgrade, more than twice our load center alone. If you tier markups by part cost, keep equipment at the divisor and check the blended margin across a month of jobs.

    Trip fees and minimum charges: where a GFCI swap comes out underpriced

    A service call or trip fee is the charge to come out at all. A diagnostic fee pays for finding the fault. Here is what the sources print.

    • Housecall Pro's guide: $100 to $200 for a standard residential service call.
    • Housecall Pro on diagnostics: no range, but usually higher than the service call.
    • Emergency work: 1.5 to 2 times the regular rate, or a flat $100 to $200 added.
    • FieldPulse's March 2025 guide: a $100 to $150 minimum for the first hour, covering setup and travel.

    At the defaults one hour of electrician time sells for $114 and half an hour for $57. A one-hour service call sits inside both published ranges.

    Now the finding that matters for small tasks. The cost-built GFCI swap comes to $145. Housecall Pro's contractors charged $199 to $848 to turn an indoor outlet into a GFCI, so the formula lands $54 under the low end of that range.

    We got that by running one hour and an $18.29 receptacle through the calculator at $66, 27% and 15%, then reading it against Housecall Pro's receptacle ranges.

    The billable share spreads average drive time across every billed hour, so a one-hour task carries one hour's worth of driving while using a whole truck roll. Field Promax counted about 1.13 hours a day of driving that techs never recovered.

    So charge the trip on small tasks. A one-hour service call at $114 plus the $145 task comes to $259, inside the range contractors already charge.

    Service work against bid work from plans

    A price book is for service work, where a tech quotes a known task in a customer's home. Bid work from plans is a different job. An estimator counts every device and every foot of conduit on the drawings, a step called a takeoff, then prices labor by the unit.

    The usual labor reference for that is the National Electrical Contractors Association's Manual of Labor Units. NECA's 2025 to 2027 edition rests on what the association calls accumulated industry experience. Member companies get a two-year subscription to the online database at no charge, and extra seats and PDF copies are sold through the NECA store.

    Light commercial shops that bid from plans need both. Keep the book for service calls and small installs, and run anything from a drawing set through takeoff. Our guide to electrical estimating software covers the bid side, and our electrical estimate template lays out a written quote line by line.

    How to build an electrical price book your techs can quote from

    An electrical price book is every task you sell with its flat price and what that price covers. ServiceTitan's electrician price list template, dated April 2026, has two sheets: a calculator and a flat-rate schedule. It prints a standard, a membership and an after-hours price for each task.

    1. Set the cost of a billable hour. Use your wage, a burden figure and your own billable share.
    2. List your most common tasks. Count a year of invoices and start with the jobs you do most.
    3. Time each task. Median clocked time, priced for the average tech.
    4. Price each task. Hours times the hourly cost, plus parts at your invoice price, divided by your divisor.
    5. Add the trip to small tasks. A one-hour task in the book still needs a service call on top.
    6. Write what is included. The customer will hold your line against a cost guide, so say what the price covers.
    7. Add options. The New Flat Rate's menus show five options per job.
    8. Update on a schedule. Housecall Pro's guide says quarterly. ServiceTitan says Pricebook Pro applies supplier price changes monthly.

    The update step is where books fail. A 2006 Contracting Business column reported that flat rate providers put the share of customers who update their books each year at less than half.

    The membership price matters if you sell maintenance agreements. ServiceTitan's 2023 pricing guide suggests a 10% to 15% member discount and names no source for it, so test it against your own margins first.

    What an electrical price book costs in software

    You can build the book in a spreadsheet. Software adds pre-built electrical tasks and parts prices that update. Three price book vendors print a per-tech or per-user price, and ServiceTitan and FieldEdge print none.

    What electrical price book software prints for price

    VendorPrinted price per tech or user, a monthFits a $60 budgetThe catch
    Profit Rhino SmartPrice$39 to $59YesRequired coaching fee is not printed
    Flat Rate Plus Online$50, or freeYesFree plan stops at 500 tasks
    The New Flat RateFrom $99NoStarting price only
    ServiceTitan Pricebook ProNo price printedNo price to compareAdd-on, quote only
    FieldEdgeNo price printedNo price to compareQuote only

    Prices read on each vendor's own page on November 20, 2026. With scripts on, this is a price explorer: drag your per-tech budget and see which printed prices fit.

    Housecall Pro sells the Profit Rhino books inside its own software for $199 a month, and one fee covers one or all of the HVAC, plumbing, drain cleaning and electrical books. Its Basic plan, at $59 a month billed annually, includes a price book, and flat-rate pricing starts on Essentials at $149.

    At the low end, Keys to the Truck sells an electrical flat-rate price book spreadsheet for $29, one time. It lists 200 electrician jobs in 12 categories, and its own page says the sample numbers are placeholders you replace with your costs and times.

    Profit Rhino's page says coaching and implementation are required and prints no fee, so ask before you compare. For the sibling trade, our plumbing flat rate pricing guide runs the same build on water heaters and drains.

    Electrician flat rate pricing against what contractors charge

    Housecall Pro published what its electrical customers charged across 636,022 service entries in the year to September 2026. Here are the three jobs at the calculator defaults beside that data and the homeowner guides.

    JobCost-built priceHousecall Pro contractors chargedHomeowner guide
    200-amp panel swap$2,517, panel only$2,250 to $5,100, with all breakers$1,600 to $4,000 (Fixr)
    EV charger circuit$972$375 to $1,150$800 to $3,000, charger excluded (EnergySage)
    Indoor outlet to GFCI$145$199 to $848Up to $275 (Fixr)
    Service call, one hour$114$100 to $200Not compared

    The panel lands near the bottom of the contractor range and the EV circuit near the top. The GFCI falls under it. A shop paying the median wage and quoting the formula is not the expensive outlier on big jobs, and it is the cheap one on small ones.

    Two caveats. Housecall Pro's panel row includes all breakers and ours does not, and none of the cost-built prices include a permit, which Fixr puts at $50 to $300 or more for panel work. EnergySage's range comes from Qmerit's 2026 installation data.

    Owners look for price books in spring

    We pulled 12 months of Google search data for 32 electrical price searches on November 20, 2026. Pick a search in the tool below and switch to the month view to see its year.

    What people search about electrical prices, by month

    SearchUS searches a monthAverage click pricePeak month, last 12
    ceiling fan installation cost9,900$11.78Mar, 14,800
    whole house generator installation cost8,100$6.77Jan, 33,100
    electrical panel replacement cost5,400$10.94Nov, 6,600
    recessed lighting installation cost3,600$11.09Jan, 5,400
    ev charger installation cost2,900$8.81Mar, 4,400
    electrical panel upgrade cost1,900$11.40Dec, 2,900
    level 2 charger installation cost1,900$7.24Mar, 2,900
    cost to rewire a house1,600$8.95Nov, 1,900
    tesla charger installation cost1,600$13.75Nov, 1,900
    gfci outlet installation cost1,600$12.49May, 2,900
    generator installation cost1,000$11.33Jan, 2,900
    cost to replace outlet480$18.02Jan, 590
    electrician flat rate pricing110$12.18Mar, 210
    electrical price book90$37.06Jan, 170

    Google Ads keyword data through DataForSEO, United States, pulled November 20, 2026. The two Price books rows are owners looking for a price book. With scripts on, this is an explorer: switch to the month view, pick a search and see where its year peaks.

    Seven owner searches about flat rate pricing and price books summed to 2,640 from March through May and 810 from August through October. That is a 3.3 times swing, from adding Google's monthly counts for each search. March alone peaked at 1,040.

    The homeowner side swings too, but one product drives it. The homeowner searches in the tool summed to 74,490 in January and 23,090 in September, a 3.2 times swing. Whole house generator installation cost alone ran 33,100 in January.

    Take out the two generator searches and the year runs from 42,490 in March to 20,470 in September, about 2.1 times.

    September and October are the newest months in the pull and the low point for most searches, so read the trough as recent. Panel and rewiring searches barely move all year, between 8,300 and 10,900 a month. Rebuild the book over the winter, and it is ready before the spring demand.

    Test the price book against last year's jobs

    Before a new book reaches a truck, run it against the jobs you already did. It takes a spreadsheet and the invoice export, and it catches the tasks priced below cost.

    1. Export last year's invoices for your top tasks, with the price charged and the hours clocked.
    2. Re-price each job at the new book price.
    3. Compare revenue. The gap is what the new book would have added or lost at the same job count.
    4. Check margin by task. Price minus direct cost should leave your overhead plus profit share, 42% at the defaults.
    5. Flag the outliers. Any task where clocked time beat the book by half, or ran double, needs a new time.
    6. Watch the win rate. Housecall Pro's guide warns that winning nearly every estimate may mean you are underpriced.

    Track the close rate task by task after rollout. If a price rises and its close rate holds, the old price was low. If it falls sharply, check the description before the number.

    Three pricing moves to skip

    • Pricing small tasks from the formula alone. The GFCI swap comes out $54 under the low end of Housecall Pro's range without a trip charge.
    • Copying a competitor's menu or a $29 template as printed. Their task times and wages are not yours, and the spreadsheet's own page calls its numbers placeholders.
    • Using an unsourced billable share. Housecall Pro's 30% "average" more than doubles the rate the measured 65% gives.

    All three borrow someone else's number. The formula only works with your wage, your billable share and your overhead inside it.

    When the prices are right and the phone is quiet

    On the IRS returns, advertising took 0.36% of receipts at electrical contractor corporations, less than half the share at plumbing and HVAC corporations.

    Put marketing inside your overhead number first, then judge each channel by what a booked job costs. A clean electrician invoice that shows what the flat price covered helps the customer who calls you back.

    Skill Mammoth builds websites and runs marketing for contractors and home service businesses. Plans start at $350 a month, and a website build is $3,000 or $150 a month for 24 months. If the prices are right and the calendar has gaps, that is the part we can help with.

    Want more calls at the prices you just set?

    We build the website and run the marketing that fills an electrical schedule. Plans start at $350 a month.

    Book an intro call

    Frequently asked questions

    How do you calculate flat rate pricing for electrical work?

    Multiply the task's labor hours by the cost of a billable hour, add what the parts cost you, then divide by one minus your overhead and profit shares. At $66 an hour, 27% overhead and a 15% profit, the divisor is 0.58. A 200-amp panel swap with 14 labor hours and a $536 load center prices at $2,517, with $378 of net profit, before breakers and the permit.

    What should an electrician charge per hour?

    Enough to cover the cost of a billable hour plus overhead and profit. At $29.60 an hour, the BLS median at electrical contractors divided over 2,080 hours, with 45% in benefits and taxes and 65% of paid time billed, an hour costs about $66. At 27% overhead and 15% profit it sells for about $114. Housecall Pro says electricians typically charge $50 to $130 an hour.

    How much should an electrician charge for a service call?

    Housecall Pro's October 2026 guide puts a standard residential service call at $100 to $200, with emergencies at 1.5 to 2 times the regular rate. FieldPulse suggests a $100 to $150 minimum for the first hour. At a $66 billable hour, 27% overhead and 15% profit, one hour of electrician time sells for about $114, inside both ranges.

    Is flat rate pricing better than time and materials for electricians?

    For repeatable tasks such as device swaps and panel changes, usually yes. The customer knows the price first, and a faster tech keeps the full price. The shop carries any overrun, so task times must come from your own invoices. Housecall Pro calls a hybrid usually best: flat rate for predictable jobs and hourly pricing for diagnostics.

    How much does electrical price book software cost?

    On vendor pages read November 20, 2026, Profit Rhino SmartPrice runs $39 to $59 per tech a month plus a required coaching fee it does not print. Aptora's Flat Rate Plus Online is $50 per user a month, with a free plan for 500 tasks. The New Flat Rate starts at $99 per tech. ServiceTitan and FieldEdge print no price.

    How do you build an electrical price book?

    List the tasks you sell most from a year of invoices and time each one at the median clocked time. Price it as hours times your billable hour cost plus parts, divided by one minus overhead and profit. Add a trip charge to small tasks, write what each price includes, and update parts prices quarterly, as Housecall Pro advises.

    AS

    Written by Alex Storey

    Founder of Skill Mammoth Digital. Builds the sites, runs the SEO and writes every article here. More about Alex.

    Book a Free Strategy Call