TL;DR
- Price = (labor hours × cost of a billable hour + paint) ÷ (1 − overhead − profit). At 29% overhead and 8% profit, divide by 0.63.
- A painter at the BLS mean wage of $26.64 costs about $59 per billable hour, which sells for about $94.
- Cost-built prices: a 12 by 14 bedroom with ceiling and trim $1,663, a 2,000 sq ft exterior $6,761, 4,000 sq ft of interior walls $7,100.
- The production rate moves the price most. The same exterior is $4,794 at 75 sq ft an hour and $6,761 at 42.
- Cost guides disagree: a 2,000 sq ft interior is $2,000 to $8,000 at This Old House and $11,498 to $21,400 at Fixr.
- Exterior price searches run 6.9 times higher in July than in December, so set exterior prices before spring.
Here is how to price painting jobs: divide each measured surface by a production rate to get labor hours, multiply by the cost of a billable hour, add the paint, then divide by 0.63 to leave 29% for overhead and 8% for profit. A bedroom with walls, ceiling and trim prices at $1,663.
This guide is for owners of one-painter to ten-painter residential and light commercial companies, and for whoever writes their estimates. Every figure was read at its source on November 21, 2026, and the three tools below take your own numbers.
How to price painting jobs: hours, paint and one divisor
The formula has five inputs. Each one gets its own section below, with the source for the default.
- Labor hours. Measured area of each surface divided by your production rate, the square feet or linear feet one painter finishes in an hour.
- Cost of a billable hour. Wage plus benefits and taxes, spread over the hours a customer pays for.
- Paint and sundries. Gallons from the manufacturer's coverage figure, at what you pay.
- Overhead. Every cost not tied to one job, as a share of revenue.
- Net profit. What you keep, also as a share of revenue.
Overhead and profit are shares of the price, so the formula divides by what is left after them. Dividing by 0.63 is the same as a 58.7% markup on labor and paint alike. Do not add a separate paint markup on top, or you mark the paint up twice.
Set your own numbers in the calculator below. The job buttons load four jobs built from PaintScout and Estimate Rocket production rates and Benjamin Moore coverage and prices.
Here are three of the calculator's jobs line by line. Direct cost is the labor and paint that go into that job and no other.
| Line | 12 by 14 bedroom | Full interior, walls | 2,000 sq ft exterior |
|---|---|---|---|
| Labor hours | 12 | 47 | 52.5 |
| Hours times $59 | $708 | $2,773 | $3,098 |
| Paint at the printed price | $340 | $1,700 | $1,162 |
| Direct cost | $1,048 | $4,473 | $4,260 |
| Divided by 0.63 | $1,663 | $7,100 | $6,761 |
| Overhead at 29% | $482 | $2,059 | $1,961 |
| Net profit at 8% | $133 | $568 | $541 |
The full interior starts from Housecall Pro's paint calculator, which says a typical 2,000 square foot home interior takes 15 to 20 gallons.
The top of that range, at 400 square feet a gallon over two coats, covers 4,000 square feet.
Treating that as 4,000 square feet of wall is our inference, since the gallons cover a whole interior. At 85 square feet an hour it takes 47 hours, and ceilings and trim are left out.
The exterior is 2,000 square feet of wall at Estimate Rocket's 42 square feet an hour, or 47.6 hours. Washing at the top of PaintScout's range adds five more, for 52.5 in all.
Its paint is two coats at 300 square feet a gallon, the low end Benjamin Moore prints for Regal Select Exterior. That is 13.3 gallons, so 14 at $82.99.
Run the markup check before you trust a percentage. Add 29% and 8% to the bedroom's cost as a 37% markup and the quote is $1,436.
After overhead that quote loses $29 on the job, where the divided price nets $133.
How to price painting jobs by the square foot, the hour or the room
Painters quote three ways, and all three rest on the same hours and paint. Fixr's painter cost guide, updated in January 2025, lists per square foot, per hour, per day at $200 to $800 and per room. Housecall Pro's March 2026 price guide for contractors adds flat-rate and tiered packages.
| Method | Works for | Breaks on |
|---|---|---|
| Per square foot | Whole houses, open plans, commercial floors | Small rooms heavy with trim and doors |
| Per hour or per day | Repairs, touch-ups, unclear scope | Customers who fear an open meter |
| Per room or per job | Standard repaints you have timed before | Rooms that differ from your average |
| Verdict | Build from hours, quote one job price | |
Fixr recommends a fixed price over a day rate because day rates grow when a job runs long. A fixed price built from your hours also rewards a fast crew.
Per square foot is the number homeowners carry around. Use it as a check on your build, not as the build. The bedroom's $1,663 works out to $9.90 per square foot of floor.
Measure the job: walls, openings, coats and trim
Measure every job yourself. Benjamin Moore's contractor guide on estimating says not to rely on the customer's figures. Here is the order for a takeoff, the list of measured quantities.
- Walls. Add the lengths of the walls and multiply by the ceiling height. The 12 by 14 bedroom with 8-foot walls has 416 square feet.
- Openings. This Old House says to subtract 20 square feet a door and 10 a window. Housecall Pro's calculator uses about 21 and 15.
- Ceilings. Ceiling area equals the floor area, 168 square feet in the bedroom.
- Trim. Measure baseboard and crown by the linear foot, and count doors and windows as items.
- Coats. Write the coat count on every surface. It changes both the hours and the gallons.
With This Old House's deductions, the bedroom's walls come to 376 square feet. This Old House's rule of thumb is two coats on walls and one on the ceiling. Our example paints two on both, so the numbers match PaintScout's two-coat rates.
Production rates: what one painter covers in an hour
We found no free published table of production rates. The Painting Contractors Association (PCA) sells a Cost and Estimating Guide whose second volume is titled Rates and Tables. The free figures we found are worked examples in estimating software help pages, so treat them as a starting point.
| Surface and coats | Example rate | Published by |
|---|---|---|
| Walls, two coats | 85 sq ft an hour | PaintScout help center |
| Walls, one coat | 125 sq ft an hour | PaintScout help center |
| Ceiling, two coats | 60 sq ft an hour | PaintScout help center |
| Baseboard, two coats | 25 linear feet an hour | PaintScout help center |
| Door and frame, one side, two coats | 1.5 hours each | PaintScout help center |
| Window frame, two coats | Half an hour each | PaintScout help center |
| Exterior stucco, two coats | 75 sq ft an hour | PaintScout guide, August 2025 |
| Exterior siding, medium texture, coats not stated | 42 sq ft an hour | Estimate Rocket support |
| Power washing | 300 to 400 sq ft an hour | PaintScout guide, August 2025 |
Run the bedroom through PaintScout's rates and it takes 11.8 hours, rounded to 12 in the calculator.
Walls take 4.4 hours, the ceiling 2.8 and the baseboard 2.1. The door and two windows add 2.5 between them.
PaintScout's own 12 by 15 example lists 13.5 hours, but two of its lines do not equal area divided by rate, so we computed ours from the rates.
The exterior rate is where estimates split
The two exterior figures are far apart. PaintScout calls its 75 square feet an hour on stucco slower than average. Estimate Rocket's siding example runs 42.
On a 2,000 square foot exterior that gap is 21 hours of labor. At the calculator defaults the house prices at $6,761 on the slower rate and $4,794 on the faster one.
Both pages present their rates as adjustable examples. Time two or three jobs per surface with a stopwatch, divide the area by the hours and keep a log. PaintScout's help center says to build rates from your own time tracking and check them periodically.
Paint coverage per gallon, from the manufacturers' pages
Gallons are area times coats, divided by the coverage the manufacturer prints. Here is what three product pages and two data sheets print per coat.
| Product | Coverage per gallon | Printed price |
|---|---|---|
| Benjamin Moore Regal Select Interior | 400 to 450 sq ft | $84.99 a gallon |
| Sherwin-Williams SuperPaint Interior Latex Flat | 350 to 400 sq ft | Not printed |
| Benjamin Moore Regal Select Exterior Flat | 300 to 400 sq ft | Not sold online |
| Benjamin Moore Regal Select Exterior Low Lustre | Not on its page | $82.99 a gallon |
| Sherwin-Williams SuperPaint Exterior Latex Low Lustre | 350 to 400 sq ft | Not printed |
The Sherwin-Williams figures come from product data sheets dated April 2025 and August 2026, at 4 mils wet. Estimate low on coverage. Rough, porous or bare surfaces drink more, and both companies print a range for that reason.
The bedroom needs 1.88 gallons on the walls and 0.84 on the ceiling at 400 square feet a gallon. You buy three gallons, plus one of semi-gloss for the trim, which is four at $84.99.
Sundries are tape, plastic, caulk, patch and roller covers. Nobody we read publishes a figure for them, so add your own line from last year's receipts. Enter your contractor price for paint, too. The retail price on a product page is the ceiling.
how much producer prices for exterior and interior architectural coatings rose in the year to October 2026, from the BLS Producer Price Index (preliminary).
That is our arithmetic on two BLS index series, October 2025 against October 2026. Exterior paint costs are climbing faster, so an exterior price from last spring is already short on materials.
A painter at $26.64 an hour costs about $59 per billable hour
Start with what the painter earns. The Bureau of Labor Statistics (BLS) publishes pay for painters, construction and maintenance, from its May 2025 survey of 225,190 jobs.
- Mean wage: $26.64 an hour, or $55,420 a year.
- Median wage: $23.75 an hour.
- Lowest tenth under $18.00 an hour, highest tenth over $37.89.
- Mean at building finishing contractors, the group that holds painting contractors: $26.14 across 148,030 jobs.
BLS also measures labor burden, what an employer pays on top of the wage. For construction, extraction, farming, fishing and forestry occupations in June 2026, every wage dollar carried another 45 cents. That covers paid leave, insurance, retirement, bonus pay and required taxes.
So a $26.64 wage loads to $38.63 before a single hour is billed. Painters are a construction occupation, and it is the same BLS row our electrical and plumbing pricing guides use.
No one publishes a billable share for painters
A billable hour is one a customer pays for. Drive time, supply runs, setup and cleanup all sit between paid and billed. The only measured share we found is for HVAC. Field Promax tracked 300 HVAC companies and found techs bill 5.7 of 8.8 paid hours, about 65%.
Divide $38.63 by 0.65 and a billable hour costs $59.43, which the job calculator rounds to $59.
At 29% overhead and 8% profit that hour sells for about $94. Pull four weeks of timesheets, divide invoiced hours by paid hours and enter your own share below. Our labor rate calculator walks the same build for other trades.
Homeowners are told a lower number. Fixr says painters typically charge $40 to $60 an hour, and This Old House prints $30 to $60 for walls in good condition. The top of both ranges is what a mean-wage painter's billable hour costs you before overhead.
The Census Bureau's 2022 business statistics give a check on the labor share. Painting and wall covering contractors paid 30.7% of their receipts in payroll.
That is our arithmetic on the Census table of 37,830 employer firms, and 82.9% of those firms took in under $1 million.
Overhead and profit: what painting contractors' tax returns show
Overhead is every cost not tied to one job: the office, trucks, insurance, software, marketing and your own salary. Total twelve months of it from your profit and loss statement (P&L) and divide by revenue for the same months.
If your books are not split that way yet, the IRS has the closest national figure. Its Statistics of Income Table 5.1 for tax year 2023 has no painting column. Painting files under building finishing contractors, which the table folds into other specialty trade contractors, a catch-all of 379,071 corporate returns.
| Line, share of business receipts | Other specialty trade contractors |
|---|---|
| Cost of goods sold | 63.6% |
| Gross margin | 36.4% |
| Overhead, officer pay included | 28.8% |
| Net income | 7.6% |
| Advertising | 0.48% |
| Our default | 29% overhead, 8% net profit |
Those shares are our arithmetic on the IRS table. The same column holds roofers, drywall crews and flooring installers, so read it as a neighborhood average. Your own P&L beats it the day you have one.
of business receipts went to overhead at the corporations that include painting contractors, from IRS Statistics of Income for tax year 2023. Net income was 7.6%.
Benjamin Moore's contractor guide prints a much lower overhead figure, about 10% for trades, citing a National Association of Home Builders (NAHB) survey. The tax returns say nearly three times that. We default to the IRS figure because it counts every cost between gross margin and net income.
On profit the sources agree more. Benjamin Moore's guide calls 8% to 12% net a common range, close to the IRS average of 7.6%.
Housecall Pro's guide says 20% to 40% is commonly cited and names no source, so test it before you print it. Our markup vs margin guide has the conversion table.
Priced right, but the calendar has gaps?
A good price only pays on the jobs you win. Skill Mammoth builds websites and runs marketing for contractors and home service businesses.
Three worked jobs beside what the cost guides print
Here are the calculator's jobs at the defaults, set beside three published price ranges. Fixr and This Old House write for homeowners, updated in January 2025 and in spring 2026. Housecall Pro's March 2026 guide writes for contractors and cites Angi, HomeAdvisor and Thumbtack data.
| Job | Cost-built price | Fixr | This Old House | Housecall Pro |
|---|---|---|---|---|
| Bedroom, walls, ceiling and trim | $1,663 | $504 to $672 (12 by 14) | $300 to $800 (132 sq ft) | $400 to $800 (10 by 12) |
| Bedroom, walls only | $691 | $252 to $588 (12 by 14) | Not compared | Not compared |
| Full interior, 2,000 sq ft home | $7,100, walls only | $11,498 to $21,400 | $2,000 to $8,000 | $3,000 to $8,000 |
| Exterior, 2,000 sq ft of wall | $6,761 | $5,675 to $10,561 | $4,400 to $8,800 | $2,500 to $10,000+, any size |
The Fixr bedroom rows are our arithmetic: its rates per square foot of floor times the room's 168 square feet. Fixr's own room average, $990 to $1,320, sits well above that result.
The trim preset, 300 feet of baseboard and eight doors, prices at $2,517.
This Old House prints $1 to $3 a linear foot for interior trim and $40 to $100 a door.
The exterior lands near This Old House's $6,600 average for 2,000 square feet of paintable area. The bedroom lands above every range.
Two inputs drive the bedroom: 12 hours at PaintScout's example rates and $340 of paint at retail. A crew faster than those examples, or a contractor paint price, closes much of the gap.
The whole-house rows disagree with each other more than with us. Fixr's low end for 2,000 square feet, $11,498, is above the top of both other ranges. When a customer quotes a cost guide, ask which one.
The cost build agrees with the paint-cost rule of thumb
Benjamin Moore's guide mentions a rough method some contractors use: price the job at 4 to 6 times the paint cost. We ran it on the three paint bills above.
- Bedroom: $340 of paint gives $1,360 to $2,040. The cost build is $1,663.
- Full interior: $1,700 gives $6,800 to $10,200. The cost build is $7,100.
- Exterior: $1,162 gives $4,648 to $6,972. The cost build is $6,761.
All three land inside the band, built from a BLS wage and IRS overhead with no rule of thumb in them. Use the multiple as a driveway check, and build the price from hours.
Prep, access and height: price them as their own lines
None of the production rate pages we read prints a percentage adder for prep, ladders or height. Price them as separate lines with their own hours, so the customer sees what the extra money buys.
- Height: This Old House prices a two-story 2,000 square foot exterior at $6,900 to $12,700, 44% to 57% above one story.
- Condition: Fixr says walls in poor condition can cost over 60% more to paint.
- Dirt and damage: This Old House says cleaning and repair can double the time and labor.
- New drywall: Benjamin Moore's guide says to allow 30% longer for priming and caulking.
- Scaffolding: Fixr puts rental at $15 to $50 an hour.
Homes built before 1978 carry one more line. The Environmental Protection Agency's Renovation, Repair and Painting rule says firms paid to disturb paint there must be certified, with workers trained in lead-safe practices. That means containment, cleanup and verification time on every pre-1978 job.
Minimum job charges: what a touch-up still costs
A two-hour touch-up uses the same truck, drive and cleanup as a full day. Housecall Pro's guide says many painting businesses set a minimum of $250 to $500 for small jobs, and This Old House notes that contractors often have minimums.
At the defaults an hour of painting sells for about $94, so Housecall Pro's range buys 2.7 to 5.3 billed hours. Fixr notes a travel fee of about $50 from painters who travel far.
Pick a minimum and print it on every estimate. The two-hour job priced from the formula alone will lose money once the drive and setup are counted.
How to bid painting jobs on commercial work
Commercial work is bid from plans, often per square foot. Housecall Pro's guide puts it at $1.50 to $5 or more per square foot and says margins run tighter. It lists lifts, insurance, bonding, scheduling and staging as costs residential estimates leave out.
Public work adds a wage rule. The Department of Labor's Davis-Bacon rules cover federal contracts over $2,000, painting and decorating included, and require locally prevailing wages and fringe benefits. Wage determinations are published on SAM.gov. Put the prevailing wage into the labor cost in place of your shop wage.
The formula stays the same, and only the takeoff changes: it comes from drawings instead of a tape measure. Our guide to painting estimating software covers the tools that measure from plans.
Homeowners price-shop exteriors in July, and look for painters in winter and fall
We pulled 12 months of Google search data for 30 painting searches on November 21, 2026.
Exterior price searches drew 10,490 searches in July against 1,510 in December, a 6.9 times swing.
Interior price searches ran from 9,300 in September to 18,300 in March, about 2 times. We got those by adding Google's monthly counts for two exterior and four interior cost searches.
Exterior questions are 13% to 15% of those price searches from November to February and 42% in July. The homeowner comparing your exterior quote to a cost guide is most likely doing it in midsummer.
Hiring searches peak earlier. The three "painters near me" searches summed to 197,900 in January and 201,200 in February, against 77,000 in November.
October 2026, the newest month, jumped to 361,200, so read that spike with care.
The owners' searches about how to price and bid barely move all year, 550 to 790 a month. Set next season's prices in winter, before the calls start.
Raise prices and check them against last year's jobs
Housecall Pro's guide says to review pricing at least once a year and sooner when wages, materials, fuel or insurance rise. Benjamin Moore's guide says to compare every finished job against its estimate. Here is the yearly check.
- Export last year's jobs with the price charged, the hours clocked and the paint bought.
- Rebuild your production rates from those hours, surface by surface.
- Reprice each job at this year's wage, paint price, overhead and profit.
- Compare the totals. The gap is what the new prices would have added or lost at the same job count.
- Check margin by job type. Price minus direct cost should leave 37%, your overhead plus profit at the defaults.
- Raise exterior paint first. Exterior coatings rose 4.6% at the producer level in the year to October 2026.
The painting estimate template lays a price out line by line for the customer, and the painting contract template turns an accepted estimate into signed terms.
Three pricing moves to skip
- Quoting the cost guide's hourly rate. The top of Fixr's $40 to $60 an hour is about what a mean-wage painter's billable hour costs you, before overhead or profit.
- Adding a paint markup after dividing. The 0.63 divisor already marks paint up 58.7%.
- Trusting one production rate on exteriors. The two published examples are 42 and 75 square feet an hour, a $1,967 swing on one house.
All three borrow someone else's number. The formula only works with your hours, your wage and your overhead inside it.
When the prices are right and the phone is quiet
On the IRS returns, advertising took 0.48% of receipts in the group that holds painting contractors. Pricing fixes what each job earns. It does not create jobs.
Put marketing inside your overhead number first, then judge each channel by what a booked job costs. Our guide to painting leads compares the five channels.
Skill Mammoth builds websites and runs marketing for contractors and home service businesses. Plans start at $350 a month, and a website build is $3,000 or $150 a month for 24 months. If the prices are right and the calendar has gaps, that is the part we can help with.
Want more calls at the prices you just set?
We build the website and run the marketing that fills a painting schedule. Plans start at $350 a month.
Frequently asked questions
How do you price a painting job?
Divide each measured surface by your production rate to get labor hours, multiply by the cost of a billable hour, add the paint, then divide by one minus your overhead and profit shares. At $59 an hour, 29% overhead and 8% profit, the divisor is 0.63. A 12 by 14 bedroom with ceiling and trim takes 12 hours and $340 of paint, and prices at $1,663.
How much should a painter charge per hour?
Enough to cover the cost of a billable hour plus overhead and profit. At the BLS mean painter wage of $26.64 (May 2025), with 45% in benefits and taxes and 65% of paid time billed, an hour costs about $59. At 29% overhead and 8% profit it sells for about $94. Fixr tells homeowners painters typically charge $40 to $60 an hour.
How much do painters charge per square foot?
Fixr prints $3 to $4 per square foot of floor for a whole room and $1.50 to $3.50 for walls only, and $2.84 to $5.28 per square foot of exterior wall. This Old House prints $2.20 to $4.40 for exterior paintable area. Use those as a check. A cost-built bedroom with ceiling and trim came to $9.90 per square foot of floor at our defaults.
How do you bid painting jobs?
Measure every surface, subtract doors and windows, and write the coats. Turn area into hours with your own production rates, then price hours, paint, overhead and profit with the divisor. Add prep, height and pre-1978 lead-safe work as separate lines, and set a minimum charge. Commercial bids come from plans, and federal jobs over $2,000 need Davis-Bacon prevailing wages.
How many square feet can a painter paint in an hour?
It depends on the surface and your crew, so time your own. PaintScout's help center uses 125 square feet an hour for one coat on walls and 85 for two coats, 60 for ceilings and 25 linear feet of baseboard. Exterior examples disagree: PaintScout uses 75 an hour on stucco and Estimate Rocket 42 on medium-texture siding.
What is a good profit margin for a painting business?
IRS returns for tax year 2023 show 7.6% net income for the corporations that include painting contractors, after 28.8% in overhead. Benjamin Moore's contractor guide calls 8% to 12% net a common range. Housecall Pro's guide says 20% to 40% is commonly cited and names no source. Set your target, then divide by what remains after overhead and profit.
ChatGPT