Back to Blog
    Business Growth

    Plumbing Estimate Template: Write It, Price It, Win the Job

    Free plumbing estimate template in Excel and PDF, with a worked water heater job, good-better-best options and a calculator that prices lines from your costs.

    Nov 20, 2026Updated Nov 20, 202616 min read

    TL;DR

    • A plumbing estimate that wins and protects the margin has eleven sections, and five of them are plumbing-specific: fixture details, existing conditions, code and permit, shut-off and access, haul-away.
    • Price every line at cost divided by 0.61 (29% overhead, 10% profit). A median-wage plumber's $68 billable hour sells for $111.48.
    • The sample job, a 50 gallon gas water heater swap in Minneapolis, totals $1,884.85 with a $75 permit passed through at cost.
    • The editable Excel workbook and the print-ready PDF are free. The full sample is also in a table below.
    • Skip adding 39% to cost. On the sample job that quotes $1,535 and loses $14.
    • Price tankless as its own complete option. In February, 59% of the US water heater price searches we pulled were about tankless.

    A plumbing estimate template that wins the job lists what you will install and what you found, then prices every line at cost divided by 0.61, which leaves room for overhead and profit. On our sample job, a gas water heater swap in Minneapolis, the estimate comes to $1,884.85.

    This guide is for the owner or office manager who writes plumbing estimates and wants each one to defend its price. Every figure was read at its source on November 20, 2026.

    Download this plumbing estimate template. The editable Excel workbook with the totals wired up, a field guide tab, and a print-ready PDF are free in the contractor templates pack, alongside the other trades.

    What a plumbing estimate template holds: the sample job

    The sample is a fictional shop, Tallgrass Plumbing Co., quoting a fictional customer in south Minneapolis. Her 2012 gas water heater is leaking at the base. The estimate offers three tiers and prices the one she picked.

    Here is every line, with the same quantities, rates and totals as the workbook.

    DescriptionQtyUnitRateAmount
    Labor
    Drain, disconnect and remove old heater; haul away1hr$111.48$111.48
    Set heater, connect gas, water and vent; fill, light, test2hr$111.48$222.96
    Materials
    Connectors, valves and fittings (gas, water, T&P discharge)1lot$245.90$245.90
    Options (put 1 in the qty of the one you pick)
    Good: 50 gal gas tank, like for like1each$1,229.51$1,229.51
    Better: Good plus thermal expansion tankeach$1,295.08
    Best: gas tankless, condensing, includes 3 more labor hourseach$3,613.11
    Best only (add if tankless is chosen)
    Wall venting for the tankless heatereach$400.00
    Gas line upsizing to the heatereach$400.00
    Permit (passed through at cost)
    City of Minneapolis plumbing permit, water heater (sample fee)1each$75.00$75.00
    Subtotal$1,884.85
    Sales tax (0%)$0.00
    ESTIMATE TOTAL$1,884.85

    Three things in that table do most of the work. The labor lines carry a sell rate built from your costs. The options carry prices for tiers the customer did not pick, with the quantity left blank. And the permit passes through at the city's fee, the way Service Fusion's worked example handles it.

    The blank quantity is how the workbook keeps declined options out of the total. Its subtotal adds only lines that have both a quantity and a rate. Put 1 in the quantity of the option the customer picks.

    Walk the plumbing estimate template top to bottom

    Template sites hand over a blank form with a logo box and a line-item grid. ServiceTitan's and Housecall Pro's free versions both sit behind a sign-up form and give no labor rate, markup or overhead guidance. Here is what goes in each section, in the order it prints.

    Identity block

    Business name, phone, license number, bond and insurance. Minnesota's Department of Labor and Industry requires a plumbing contractor license for work in communities over 5,000 people and a $25,000 surety bond.

    Some states write the rule into the estimate itself. Texas plumbing board rule 367.10, in its March 2026 rules, requires the master plumber's name and license number on the first page of every estimate. The phrase "regulated by the Texas State Board of Plumbing Examiners" must sit beside them, in 12-point type or larger.

    Estimate number, date and validity

    Use a sequential number and a valid-until date, not just "valid 30 days." Jobber's pricing guide says most estimates expire within 30 days. Go shorter when equipment prices are moving, because the heater on line six is the number that changes.

    Customer and job address

    Print both when they differ. Landlords and property managers pay from somewhere else, and the permit follows the job address.

    Fixture and system details

    This is the plumbing block, and the line a customer uses to compare your price with the next one. Write what is being replaced or installed:

    • Make and model, existing and new
    • Size: gallons, or the flow rate on a tankless unit
    • Fuel type: natural gas, propane or electric
    • Vent type: atmospheric, power vent or direct vent
    • Age, read from the data plate

    "Replace water heater" is an argument waiting to happen. "50 gal natural gas tank, atmospheric vent, like for like" is a specification.

    Close the block with exclusions: what the price does not cover. The sample leaves out drywall or floor repair, gas piping past the heater connection and venting changes unless Best is chosen.

    Existing conditions found

    Write down what you saw before you priced it. A stiff gas valve, a missing expansion tank, corrosion on the vent connector. On the sample, the valve still works and gets noted anyway.

    When that valve fails mid-job, the change order is for something the customer was warned about in writing. That is a five-minute conversation instead of a dispute.

    Code and permit

    Say who pulls the permit, which city issues it, the fee and who meets the inspector. The City of Minneapolis plumbing permit page lists replacing a water heater among the work that needs one.

    Pass the fee through at cost on its own line. The $75 in the sample is a placeholder taken from Service Fusion's example. This Old House and Thumbtack both tell homeowners to budget $50 to $200, so enter your city's real fee.

    Water shut-off and access

    State how long the water or gas will be off and the path to the work. "Hot water off about 3 hours, clear a 3 ft path to the heater" heads off the phone call at hour two.

    Haul-away

    Say the old unit leaves with you and where its cost sits. Thumbtack tells homeowners removal can run around $100, and This Old House prints $100 to $300. If your price includes it, say so on the page.

    Labor

    Hours times your sell rate, split into steps the customer can follow. The sample shows one hour to drain, remove and haul away and two hours to set, connect, fill and test. This Old House puts a standard tank install at 1 to 3 hours and Thumbtack at two to three.

    Materials and options

    Fittings go on one line. The heater sits inside each option, so every tier is a complete price the customer can pick without arithmetic. The next two sections cover the pricing.

    Tax, terms and signature

    The sample tax rate is 0% for a reason. The Minnesota Department of Revenue tells contractors to pay sales or use tax on the materials they buy and not to charge sales tax on construction contracts. It lists water heaters among the items that count as improving real property.

    Then the terms: validity, deposit, payment, a warranty term, the change-order sentence and a signature line that records the option chosen. Other states tax this work differently, so check yours.

    Price each line from your own costs

    The rule fits on a sticky note. Price equals direct cost divided by one minus overhead and profit. Direct cost is the labor and materials that go into this job and no other.

    The labor line: a $30.67 wage becomes a $111.48 sell rate

    The Bureau of Labor Statistics (BLS) puts the median plumber wage at $30.67 an hour in May 2025. Its employer cost survey shows what rides on top. Here is how that wage climbs to the rate on the estimate:

    StepFigureSource
    Median plumber wage$30.67 an hourBLS, May 2025
    Times 1.45 for benefits and taxes$44.47BLS employer costs, June 2026
    Divided by a 65% billable share$68.42Field Promax, 300 HVAC companies
    Rounded cost of a billable hour$68Our sample
    Divided by 0.61$111.48, the sell rate on the estimate

    The 1.45 comes from the BLS row for "construction, extraction, farming, fishing and forestry occupations": $46.65 of total compensation on $32.17 of wages.

    Part of that load is fixed by law. The IRS sets the employer's share at 6.2% for Social Security and 1.45% for Medicare.

    The billable share, the part of a paid hour a customer pays for, is the weak link. The only measured figure we found is HVAC: Field Promax tracked techs billing 5.7 of 8.8 paid hours, as ACHR News reported in June. Time your own crew. Our labor rate calculator turns your wage and billable share into a rate.

    Overhead and profit set the divisor

    Overhead is every cost not tied to one job, your own salary included. The 29% default comes from IRS Statistics of Income for tax year 2023.

    Plumbing, heating and air-conditioning corporations kept 36.3% of receipts after direct costs and 6.9% as net income. That leaves 29.4% for everything between.

    The profit share is a goal. ServiceTitan's October post calls 10% to 20% reasonable. Profitability Partners, quoted by Housecall Pro, says most plumbing shops net 5% to 12%.

    The sample job, line by line

    1. Labor. 3 hours at $68 is $204 of cost. At $111.48 an hour it bills $334.44.
    2. Fittings. $150 of connectors, valves and fittings, from Service Fusion's example, sells at $245.90.
    3. The heater. Service Fusion's $750 for a 50 gallon unit sells at $1,229.51.
    4. The work. $1,104 of direct cost becomes $1,809.85, a 64% markup on cost.
    5. The permit. $75 at cost brings the subtotal to $1,884.85.

    Out of the $1,809.85, overhead takes about $525 and $181 is profit. Set your own numbers in the calculator below. Its default is the sample job.

    Price the estimate before you send it

    JobDirect costPrice to quoteNet profitQuote if you add 39% as markup
    Gas tank, like for like: 3 hours, $900 materials$1,104$1,810$181$1,535, a $14 loss
    Switch to gas tankless: 6 hours, $2,150 materials$2,558$4,193$419$3,556, a $34 loss
    Toilet fill valve: 1 hour, $20 materials$88$144$14$122, a $1 loss
    Kitchen drain clog: 1.5 hours, $10 materials$112$184$18$156, a $1 loss

    Defaults: $68 per billable hour of labor, 29% overhead, 10% net profit. Wages and employer costs from the Bureau of Labor Statistics, billable share from Field Promax in ACHR News, overhead from IRS Statistics of Income, profit range from ServiceTitan and Housecall Pro, job times and part costs from This Old House, Thumbtack, Fixr and Service Fusion. All read November 20, 2026. With scripts on, this is a calculator: change the hours, labor cost, materials, overhead and profit.

    The calculator's $1,810 is the estimate's $1,884.85 subtotal less the $75 permit, which the estimate passes through at cost. The other buttons load a tankless switch, a toilet fill valve and a kitchen drain clog, using times and part costs from This Old House, Fixr, Thumbtack and Service Fusion.

    Why adding your percentages to cost loses money

    The common slip is to add overhead and profit to cost as one 39% markup. On the sample that quotes $1,535. Overhead takes $445 of it, which leaves a $14 loss on a job done well.

    Markup is a share of cost, and overhead and profit are shares of the price. Dividing handles that. Our markup vs margin guide has the full conversion table, and plumbing flat rate pricing turns the same formula into a price book.

    Estimates priced right, but not enough of them going out?

    Skill Mammoth builds websites and runs marketing for contractors and home service businesses. Start with an audit of the site that should be booking your estimate appointments.

    Get a website audit

    Good, better, best: price each water heater tier as its own line

    A water heater is the plumbing job with natural tiers: the same tank again, the same tank with an upgrade or a switch to tankless. Each tier on the sample is a complete line, so the customer picks a price instead of doing math.

    TierWhat changesEstimate total if picked
    Good50 gal gas tank, like for like$1,884.85
    BetterGood plus a thermal expansion tank$1,950.42
    BestGas tankless, venting, gas line, 3 more hours$5,068.45

    Better adds $40 of cost for the expansion tank, the low end of the $40 to $150 This Old House says it adds where a city requires one. If your code requires it, it belongs in the base price instead. Some shops make Better a tank with a longer warranty. Price it the same way.

    Best carries its own extra labor inside the line, for 6 hours on the job in all.

    That sits inside both figures This Old House prints: a tankless install takes 4 to 6 hours on one of its pages and 4 to 8 on another.

    The tankless unit is priced at the top of the range This Old House prints for gas models, $750 to $2,000.

    The venting and gas line rows are Best-only. Each is priced at $400, the low end of the $400 to $800 This Old House shows homeowners, because we found no published material cost. Set your own.

    Homeowners shop tankless hardest in winter

    We pulled 12 months of Google search data for 24 plumbing price and estimate searches on November 20, 2026. Pick a search in the tool below and switch to the month view to see its year.

    What homeowners search before a plumbing estimate, by month

    SearchUS searches a monthAverage click pricePeak month, last 12
    water heater replacement cost40,500$16.65Jan, 49,500
    tankless water heater cost27,100$5.64Jan, 40,500
    tankless water heater installation cost22,200$11.57Feb, 49,500
    water softener installation cost12,100$11.51Nov, 18,100
    water heater installation cost9,900$15.59Jan, 14,800
    garbage disposal installation cost9,900$15.58Nov, 12,100
    toilet installation cost5,400$14.61Jan, 6,600
    sump pump replacement cost5,400$18.25Mar, 8,100
    sewer line replacement cost4,400$23.82Apr, 6,600
    gas water heater replacement cost3,600$10.11Jan, 6,600
    free plumbing estimate2,400$45.02Mar, 2,900
    50 gallon water heater cost1,000$5.60Mar, 1,300
    40 gallon water heater cost720$4.46Jan, 880
    plumbing estimate720$59.34Mar, 880

    Google Ads keyword data through DataForSEO, United States, pulled November 20, 2026. With scripts on, this is an explorer: switch to the month view, pick a search and see where its year peaks.

    Tankless searches made up 59% of the seven water heater price searches in February and 35% in October. We computed that by adding Google's monthly counts for the seven searches and taking the share of the two tankless ones.

    The whole group swung from 146,380 searches in January to 67,800 in August, a 2.2 times swing. The ranking template pages say nothing about either pattern. The lesson for the estimate is simple: in a Minnesota winter, the customer may already have a tankless price in mind, so put the Best line on the page.

    Estimate, quote, bid or proposal: one short answer

    The words get used loosely, and the paperwork matters more than the label.

    • Estimate: a priced approximation that can change when conditions change. Most service work starts here.
    • Quote: a fixed price for a defined scope, usually with a valid-until date.
    • Bid: a price submitted against someone else's plans, often in competition.
    • Proposal: a quote plus the selling, such as options, photos and the case for your shop.

    Minnesota's written-contract law for licensed residential contractors, section 326B.809, puts estimates and bids under the same rule as contracts. Each must be in writing, with a summary of the work and the price. Plumbing alone is not one of the skills that license covers, but the statute shows how a regulator reads the labels: alike.

    Validity dates, deposits and change orders

    The template prints a 30-day validity date. After that, the equipment price gets rechecked with the supplier before the customer signs.

    Deposit rules come from the state, and they differ. California's Contractors State License Board guide caps a home improvement down payment at $1,000 or 10% of the contract price, whichever is less. It also requires a written contract on home improvement jobs over $500.

    The same guide says a price change must go through a written change order. None of the Minnesota pages we read today sets a deposit figure for plumbers, so the sample asks for none on the tank options and one to order the unit on Best. Check your state before you print a percentage.

    The change-order sentence on the sample covers the rest: anything found after work starts is written up and priced for approval before work continues. Our plumbing invoice template carries the approved estimate and any change orders through to the bill.

    Free estimates, paid diagnostics and trip fees

    Homeowners look for the free version. "Free plumbing estimate" drew 2,400 US searches a month, and advertisers paid $45.02 a click for it. "Plumbing estimate" cost $59.34 a click, the highest of all 24 searches we pulled.

    Housecall Pro's template page says most plumbers give free estimates for larger jobs and that diagnostic or service call fees are common on repairs. That split makes sense. On a replacement, the scope is visible from the doorway. On a repair, finding the problem is the work.

    • Housecall Pro's contractor data: residential diagnostics of $79 to $180.
    • Jobber's guide: $75 to $125 for a standard service call or diagnostic.
    • At the sample rate, one hour of plumber time sells for $111.48, inside both ranges.
    • Emergency work: 1.5 to 3 times the standard rate, per Housecall Pro.

    If you credit the diagnostic against the repair, make sure the repair price already carries that hour. Otherwise the waived fee is unpaid time that lowers your billable share and raises the rate you need.

    Send it the same day and follow up on a schedule

    We found no published measurement of how sending speed changes approval on residential plumbing estimates. What exists is vendor advice, and it points one way.

    • Service Fusion's quoting guide says to send the same day if you can, since customers often compare two or three quotes.
    • Housecall Pro recommends a first follow-up 24 to 48 hours after sending, a second 4 to 5 days later and a last one a week after that.
    • Jobber's guide says its software follows up automatically with customers who have not responded.

    Treat the cadence as a starting point and track your own approval rate by days-to-send.

    The cost-built price against what homeowners read

    Your customer has looked up a price before you arrive. Here are the sample's Good and Best totals beside the homeowner guides and Housecall Pro's contractor data.

    SourceGas tank replacementTankless
    This sample estimate$1,884.85$5,068.45
    Thumbtack, October 2026$1,239 to $1,353 average$747 to $2,312
    This Old House, June 2026$1,950 average, all heaters$2,800 average
    Fixr, January 2026$900 to $2,500, 50 gal gasNot compared
    Housecall Pro contractors, 2026No gas range printed$800 to $5,800, median $3,650

    The Good tier lands $65 under This Old House's average and $532 to $646 above Thumbtack's gas averages.

    Housecall Pro prints an electric range of $1,680 to $2,867 and no gas one, so it sits out of that column.

    Best runs $1,418 over Housecall Pro's tankless median. This Old House lists venting and gas line work as extra cost factors, and the sample includes both. That gap is why Best needs the fixture block and the existing-conditions line most: they explain the number.

    Is this estimate ready to send?

    Run your next estimate through the checklist below before it goes out. The checks are the template's sections, weighted by how much each one protects the price or the scope.

    Is this estimate ready to send?

    CheckWhy it countsWeight (1 to 5)
    Fixture details: make, model, size, fuel and vent typeLets a customer compare your price with the next one.5
    Existing conditions you found, written downTurns a mid-job surprise into a change order they were warned about.4
    Exclusions listedWhat the price does not cover, so nobody assumes it does.4
    A signature and date line that records the option chosenMinnesota's 326B.809 asks its licensees for signed, dated agreements.4
    Deposit and payment termsCalifornia caps a home improvement down payment at $1,000 or 10%.4
    License number, bond and insurance printedTexas requires the master plumber's license number on page one.3
    Permit line: who pulls it, which city, the feeMinneapolis requires a permit to replace a water heater.3
    A valid-until dateJobber's guide says most estimates expire within 30 days.3
    Good, better and best priced as separate linesThe customer picks a tier and does not haggle over one number.3
    The change-order sentenceCSLB says a changed price must go through a written change order.3
    Water shut-off time and access notesHeads off the call at hour two.2
    Haul-away of the old unit statedHomeowner guides print it as its own cost.2

    The checks are the sections of the template in this guide. The weights are our editorial judgment, and they total 40. With scripts on, this is a scorecard: tick what your estimate has to get a score out of 100 and the three biggest gaps.

    Building estimates in software

    A spreadsheet works for one truck. Field service software adds what a workbook cannot: the customer picks an option on their phone, signs and pays a deposit in one step.

    • Housecall Pro's help center says estimate options let you offer tiers named Good, Better or Best, and you set whether the customer can approve one option or several.
    • Jobber's help center, updated March 10, 2026, says clients can tick optional line items, the quote total adjusts automatically and a percentage deposit follows it.
    • Jobber notes optional line items are available on select plans.

    Prices and plan limits change often, so we keep them in one place. Our plumbing estimating software comparison lists every printed price.

    Five mistakes that lose the job or the margin

    1. One lump-sum line. "Replace water heater, $1,885" invites a comparison the customer cannot make. The fixture block and labor steps make it.
    2. Adding percentages to cost. A 39% markup on the sample loses $14. Divide by 0.61 instead.
    3. Tankless as an add-on to the tank lines. Without its extra hours, venting and gas line, the Best tier on the sample comes up $1,134 short.
    4. No valid-until date. An estimate signed months later at last season's equipment price comes out of your margin.
    5. Silent conditions. A stiff valve you saw and did not write down becomes a free repair or an argument.

    When the estimate is right and the phone is quiet

    A good estimate converts the calls you get. It cannot create them. On the IRS returns, advertising took 0.8% of receipts at plumbing and HVAC corporations, so the average shop spends little to fill the board.

    Skill Mammoth builds websites and runs marketing for contractors and home service businesses. Plans start at $350 a month, and a website build is $3,000 or $150 a month for 24 months. If your estimates win and the calendar still has gaps, that is the part we can help with.

    The plumbing estimate workbook and PDF are free in the contractor templates pack. For heating jobs, the HVAC estimate template uses the same layout.

    Want more estimate appointments on the calendar?

    We build the website and run the marketing that fills a plumbing schedule. Plans start at $350 a month.

    Book an intro call

    Frequently asked questions

    What should a plumbing estimate include?

    Eleven sections: identity with license and insurance, estimate number and valid-until date, customer and job address, fixture and system details, existing conditions found, code and permit, water shut-off and access, haul-away, labor, materials and options, then tax, terms and a signature line. The five plumbing-specific sections are the ones blank template sites leave out, and they are what defend the price.

    How do you price a plumbing estimate?

    Add the labor hours times the cost of a billable hour to what the materials cost you, then divide by one minus your overhead and profit shares. At 29% overhead and 10% profit the divisor is 0.61. On the sample water heater job, $1,104 of direct cost prices at $1,809.85, and the $75 permit passes through at cost for a $1,884.85 total.

    How long should a plumbing estimate be valid?

    Jobber's pricing guide says most estimates expire within 30 days, and the sample template uses 30 days with a printed valid-until date. Go shorter when equipment prices are moving. After the date passes, recheck the heater or fixture price with your supplier before the customer signs, because that line is the one that changes.

    Should plumbers charge for estimates?

    Many split it by job type. Housecall Pro's template page says most plumbers give free estimates for larger jobs and charge diagnostic or service call fees on repairs. Its contractor data puts residential diagnostics at $79 to $180, and Jobber's guide says $75 to $125. If you credit the fee to the repair, make sure the repair price already carries that hour.

    Should a plumbing estimate show good, better and best options?

    On jobs with natural tiers, yes. Price each tier as a complete line so the customer picks a price instead of doing math. The sample shows a like-for-like gas tank at $1,884.85, the same tank with an expansion tank at $1,950.42 and a tankless switch at $5,068.45. In February, 59% of the US water heater price searches we pulled were about tankless.

    How much deposit can a plumber ask for?

    It depends on the state. California's Contractors State License Board caps a home improvement down payment at $1,000 or 10% of the contract price, whichever is less. The Minnesota pages we read set no deposit figure for plumbers. The sample asks for no deposit on the tank options and a deposit to order the unit on the tankless option.

    AS

    Written by Alex Storey

    Founder of Skill Mammoth Digital. Builds the sites, runs the SEO and writes every article here. More about Alex.

    Book a Free Strategy Call